Sub OHM
Building coils and vaping in sub ohm is something where you need to know and understand what you do!
Subohm does produce an high peak on your battery.
So please make sure your batteries can take your setup!
i would recommend to use batteries which can peak to the double ampere your build has.
Cleaning
Mod
Clean the mod with soap, water and a brush. Let it dry before you use it.
Copper
Glass rubber does the job pretty good for the contacts. Cillit Bang (orange) is a nice tool as well. Just foam the copper, wait 1-2 minutes and rinse it with water.
Brass
Same as copper here.
Repair
Magnets
Magnets are glued in using UHU Max Repair
http://www.uhu.com/en/products/max-repair.html
Any super glue (2K) should work as well.
Remove old glue, make sure the surface is dry and clean.
Let the glue rest for at least 24 hours.
Any other parts would need replacement.
Like the 510 connector or copper plates
Battery
Size 21700
Maximum battery size for this mod is 70.5 mm in height and 21.2 mm in diameter.
General
If you do use bigger batteries it could happen that the mod deform because of tension.
Assembling / Disassembling
All parts except magnets can be removed and put back together.
Be gentle when tighten screws or nuts.
Use the right tools!
Part List
510 Connector
Modmaker 510er Bottom Feeder Connector
Magnets
Magnet 5 x 10 mm
www.mtsmagnete.de
Bottles incl. Tube and Caps
10 ML Silicon Bottle
produced by TZ